Salty Barrel Set Up Guide

Salty Barrel Set Up Guide

Welcome to the Salty Barrel set up guide! In this blog post, we'll walk you through the process of setting up your Salty Barrel. 

Find a Location:

  • Begin by finding a level surface clear of sharp objects to set up your Salty Barrel. Ensure a safe and stable foundation for the tub.
  • Remove the dry bag from the carry bag and unpack the tub and lid, making sure you have all the necessary components.

Tub Assembly:

  • Lay out the tub and slide the four thicker poles into the vertical pockets on the tub walls.
  • Connect the eleven thinner poles to form a long pole.
  • Bring one end of the long pole across to the other end, placing your weight on top to keep it in place.
  • Line up the ends and push them together to form a ring.
  • Clip the ring into the vertical pole cutouts.
  • Secure the Velcro around the ring to ensure stability.

Position the Coil and Connect:

  • Position the coil in a safe location and connect it to the tub using the quick-connect fittings. This will ensure proper water circulation and heating.

Fill and Heat:

  • Fill the tub with water until the top coil outlet is fully submerged, ensuring an adequate water level for a comfortable soak.
  • Follow the manufacturer's instructions to light the fire and provide a source of heat for your Salty Barrel.
  • Stir the water periodically to distribute the heat evenly and monitor the temperature to maintain your desired level.
  • After approximately two hours, your Salty Barrel will be ready for use.


  • Congratulations! You have successfully set up your Salty Barrel. Now, it's time to immerse yourself in the warm waters and enjoy moments of relaxation.

Conclusion: Thank you for following this Salty Barrel set up guide. We hope these instructions have helped you. Feel free to share your setups with us - we would love to see your Salty Barrel in action!

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.